Close window
Disclaimer:
This website has been composed with the utmost care. No rights can be founded.
If in doubt, contact Renovaid by mail:
info@renovaid.nl.
Home
Systems
PREVENTION
V-numbers
RENOVATION
H-numbers
Products
Renoflex Groen
Renoflex Oranje
Renoflex Oranje Duo
Renofix Groen
Renofix Oranje
Renobond Duo
Renotop
Renoglas
Renofast
Renofinish
Additional products
Blade cutter
Milwaukee cutters
Saw blade cutter
Milwaukee saw machine C18 HZ
Multitool
Other products
Downloads
Contact
V1
V2
V3
V4
V5
V6
V7
V8
V9
V10
V11
V12
V13
Renovation
Sealing of open joints in window frames
Sealing of seams and open joints in windows
Sealing of open joints near stone or concrete
Sealing of cracks in wood
Repair of natural defects in wood (e.g. wood knots)
Sealing of porous substrates (End grain wood, etc.)
Rounding of sharp and weathered edges
Check and, if required, correct the perimeter tolerance
Repair of damaged wood
Repair of open joints indoors
Repair of aged, brittle, putty indoors and outdoors. In wood, steel and concrete
Repair of inferior compound seams, indoors and outdoors
Opening of sealed frame-masonry joints
H-numbers
(0,97 MB)
V1 - Sealing of open joints in window frames
Products
RENOFIX Primer
RENOFLEX Repair paste
Depending on the temperature and the desired curing time,
there is a choice between two product configurations:
Renoflex Groen (10-30° C., curing in 16 hours at 20° C.) in combination with Renofix Groen.
Renoflex Oranje (2-25° C., curing in 16 hours at 10° C. and 4 hours at 20° C.) in combination with Renofix
Oranje.
Remove the paint system around the damaged area.
Check the wood moisture content level. If over 18%, let the wood dry.
Open the joints with a cutter, saw or scraper in such a way that an opening of at least 1 cm deep and 1 cm wide is created.
Apply a thin layer of
Renofix
primer in the joint and let it penetrate for at least 20 minutes and up to a maximum of 2 hours.
Insert
Renoflex
repair paste into the opening. Make sure to bring the product in good contact with the wood. Avoid air pockets.
After curing, sand. Preferably mechanically.
Any irregularities can be treated with
Renofast
. Sand lightly after curing (1/2 hour).
Finish with a paint system of your choice.
Close window
Disclaimer:
This website has been composed with the utmost care. No rights can be founded.
If in doubt, contact Renovaid by mail:
info@renovaid.nl.