V9 - Repair of damaged wood

    Wear on styles and sills, cable holes, nail holes, irregularities, etc.
  1. Remove the paint system around the damaged area.
  2. Check for hidden water ingress points such as cable holes, nails, screws, etc.
  3. Check the wood moisture content level. If over18%, let the wood dry.
  4. At larger damaged area's apply a thin layer of Renofix primer in the repair and let it penetrate for at least 20 minutes and up to a maximum of 2 hours.
  5. Insert Renoflex repair paste into the opening. Make sure to bring the product in good contact with the wood. Avoid air pockets.
  6. After curing, sand. Preferably mechanically.
  7. Any irregularities can be treated with Renofast. Sand lightly after curing (½ hour).
  8. Repair smaller damaged area's such as nail holes with Renofast. Do NOT use Renofix. Sand lightly after curing.
  9. Finish with a paint system of your choice.
Close window

Disclaimer:
This website has been composed with the utmost care. No rights can be founded.
If in doubt, contact Renovaid by mail: info@renovaid.nl.