V5 - Repair of natural defects in wood (e.g. wood knots)

  1. Remove the paint system around the damaged area.
  2. Check the wood moisture content level. If over 18%, let the wood dry.
  3. Open the wood knot or similar defect with a cutter in an oval shape to a min. depth of 1 cm.
  4. Apply a thin layer of Renofix primer in the repair and let it penetrate for at least 20 minutes and up to a maximum of 2 hours.
  5. Insert Renoflex repair paste into the opening. Make sure to bring the product in good contact with the wood. Avoid air pockets.
  6. After curing, sand. Preferably mechanically.
  7. Any irregularities can be treated with Renofast. Sand lightly after curing (1/2 hour).
  8. Finish with a paint system of your choice.
Close window

Disclaimer:
This website has been composed with the utmost care. No rights can be founded.
If in doubt, contact Renovaid by mail: info@renovaid.nl.